Micro SIM Card Connector Top Mount With Tray Height 1.80mm
- Model
- Micro SIM Card Connector（MS180-T1151-01) (SF51S006V4D)
Item specifics
- Product Height
- 1.80mm
- Usable Memory Card
- Micro SIM card
- Base Material
- LCP
- Terminals Material
- Phosphorous Bronze
- Shell Material
- Stainless Steel
Review
Description
A 2.54mm pitch, 6-pin Micro SIM card connector in a top mount, tray design. Engineer reply within 1 working day · RoHS compliant · Custom options available Connector failures are rarely dramatic. They are a few milliohms of drift, a lifted pad, a card that reads intermittently in a hot car. The tray fully encloses the card for smooth, wobble-free insertion and clean side-slot integration in phones and portables. Gold-plated terminals (≥0.025 µm) hold contact resistance to ≤30 mΩ with tight coplanarity control, keeping high-speed signals stable through humidity and thermal cycling. An LCP insulator takes lead-free reflow without deformation; the stainless-steel shell keeps the frame flat; terminals are coplanarity-controlled to ±0.05 mm. A reliable detect switch guarantees card detection, backed by the retention structure, for 10,000 insertion cycles. A datasheet lists values. A specification explains what each value controls. Final tolerances, plating thickness and acceptance criteria are confirmed on the 2D drawing and datasheet. Every structural decision keeps the card reading and held in place. Same card, same interface — the family offers different height and mechanism combinations. Most mistakes are the right connector in the wrong stack-up. Wherever the card is a user-accessible medium, retention and contact stability matter more than price. Card size: Mini SIM is largest, Nano SIM smallest. Socket and tray dimensions follow suit, so the choice must match your device slot; the three are not interchangeable. Most SIM sockets support hot-plug with a card-detect pin, so the device recognizes the card immediately. Confirm in the datasheet. Yes. SMT sockets use an LCP insulator and coplanarity-controlled terminals for standard lead-free reflow; the exact profile is in the datasheet and drawing. Send the part number and drawing. We compare pad layout, height, pitch and retention, then confirm drop-in or layout-change before sampling. Samples are free, sampling takes 7 days, and volume production is 7–15 days. MOQ and lead time are confirmed with the quotation; zero-MOQ trial runs are available. Tell us the product thickness, card type, annual volume and the part you are replacing (if any). An engineer replies within one working day with the right model, the drawing you need, and what we would change in your layout — if anything. Mention part number MS180-T1151-01 for the fastest reply.1.80mm Micro SIM card connector
Stable reads, reliable insertion
A card connector is invisible — until it fails
The card is exposed, wobbles, or is mis-inserted
Data drops at speed, card not detected
Reflow warps the insulator, pads lift
Card detection fails after a few insertions
Every parameter, translated into a design decision
Mechanical
Electrical
Materials & plating
Environment & ordering
Four decisions that keep the card reading
Same card, multiple mechanical answers
Model Height Mechanism Mounting Choose it when MS125-T1161-21 1.25mm Push-push Top mount Push-push MS150-T1130-01 1.50mm Tray Top mount Tray MS180-T1151-01 1.80mm Tray Top mount Tray MS150-T1120-02 1.50mm Hinge Top mount Hinge MS142-T6131-01 1.42mm Push-push Top mount Push-push MS150-T5200-01 1.50mm Hinge Top mount Hinge MS140-T5255-01 1.40mm Push-pull Top mount Push-pull MS135-T5250-01 1.35mm Push-pull Top mount Push-pull MS145-T1250-01 1.45mm Push-pull Top mount Push-pull MS180-T1151-01This page 1.80mm Tray Top mount Tray SM150-T1150-11 1.50mm Hinge Top mount Hinge MS135-T1250-12 1.35mm Push-push Top mount Push-push Built for products that get carried, dropped and used daily
Everything your mechanical engineer needs
Frequently asked questions
What is the difference between Mini / Micro / Nano SIM sockets?
Does the SIM socket support hot-plug?
Is it reflow compatible?
Can you cross-reference an imported brand?
What is the minimum order and lead time?
Send your stack-up. Get a drawing, a sample and a straight answer.
