SD 3.0 Card Connector, Push-Pull Type Sink 2.35mm Bottom mount Height 2.75mm Support Customization.
- Model
- SD Card Connector（SDE-D1250-52）
Item specifics
- Product Height
- 2.75mm
- Usable Memory Card
- SD 3.0 memory card
- Base Material
- LCP
- Terminals Material
- Phosphorous Bronze
- Shell Material
- Stainless Steel
Review
Description
Learn about Height 2.750mm SD 3.0 Card Connector
Secure Digital (SD) 3.0 Memory Card Connector
2.15mm Pitch SD 3.0 Memory Card Connector, Sink 2.35mm Bottom Mount DIP Type,Push-Pull structure,2.75mm Height
Advantage：
1. Strict coplanarity control ensures good reflow reliability.
2. Simple design, no automatic ejection mechanism, with price advantage.
3.Thin and light weight, small size, optimized PCB space, Saving internal space for customers.
4.Reliable detect switch,assures card detection.
Understand the Parameters of the Height 2.75 mm SD 3.0 Card Connector
|
Technical Parameters
|
||
|
Rating Current:
|
0.5 A
|
|
|
Rating Voltage:
|
500 V
|
|
|
Contact Resistance:
|
100 mΩ
|
|
|
Insulation Resistance:
|
1000 MΩ
|
|
Useful Life: | 5000 cycles | |
|
Additional Parameters
|
||
|
Transmission Rate:
|
104 Mb/s
|
|
|
Number of pins:
|
11
|
|
|
Number of interfaces:
|
1
|
|
|
Features:
|
Short Type Small Size
|
|
Used for: | Computer/Card reader/Docking Station/Laptop/Digital Cameras | |
Download
Detail Drawing of Height 2.75mm SD 3.0 Card Connector
Application of Height 2.75mm SD 3.0 Card Connector
Laptop Computer
Digital Camera
Card Reader
Instructions for Use of Height 2.75mm SD 3.0 Card Connector
- Step 1:Insertion SD card
- Locate the SD card connector: The SD card holder is usually located on the side of the device, usually with a small cover or exposed slot.
- Insertion the SD card: Make sure the gold fingers of the SD card is facing down and aligned with the slot of the card holder, gently insert the SD card into the card holder.
- Fixed SD card: Once the SD card is inserted, the card will protrude slightly and be in a fixed position. The card should not protrude from the surface of the device.
- Step 2:Taking out the SD card
- Before removing the SD card, make sure the device has stopped using the card. On most devices, you can safely unmount the card from the operating system to avoid data loss or corruption.
- Press the edge of the SD card and it will automatically exit so you can safely remove it.
