SD 3.0 Card Connector, Push-Pull Type, Top mount, Height 2.80mm, Support Customization.
SD 3.0 Card Connector, Push-Pull Type, Top mount, Height 2.80mm, Support Customization.
SD 3.0 Card Connector, Push-Pull Type, Top mount, Height 2.80mm, Support Customization.
Model
SD Card Connector(SDD-T1250-71)

Item specifics

Product Height
2.80mm
Usable Memory Card
SD 3.0 memory card
Base Material
LCP
Terminals Material
Phosphorous Bronze
Shell Material
Stainless Steel

Review

Description

Learn about Height 2.80mm SD 3.0 Card Connector
SD card socket connector
Secure Digital (SD) 3.0 Memory Card Connector

2.50mm Pitch SD 3.0 Memory Card Connector, Top Mount  DIP Type, Push-Pull structure, 2.80mm Height

Advantage:
1. Strict coplanarity control ensures good reflow reliability.

2. Simple design, no automatic ejection mechanism, with price advantage.

3.Thin and light weight, small size, optimized PCB space, Saving internal space for customers.

4.Reliable detect switch,assures card detection.


Understand the Parameters of the Height 2.80 mm SD 3.0 Card Connector
Technical Parameters
Rating Current:
0.5 A
Rating Voltage:
500 V
Contact Resistance:
100 mΩ
Insulation Resistance:
1000 MΩ
Useful Life: 
5000 cycles
Additional Parameters
Transmission Rate:
104 Mb/s
Number of pins: 
11
Number of interfaces:
1
Features: 
Short Type Small Size
Used for:
Computer/Card reader/Docking Station/Laptop/Digital Cameras
Download
2D Drawing PDF

Data Sheet

Detail Drawing of Height 2.80mm SD 3.0 Card Connector
SD socket card connector
 sd card connector
Application of Height 2.80mm SD 3.0 Card Connector
micro sd card connector
Laptop Computer
micro sd memory card connector
Digital Camera
micro sd card connector
Card Reader
Instructions for Use of Height 2.80mm SD 3.0 Card Connector
  • Step 1:Insertion SD card
  • Locate the SD card connector: The SD card holder is usually located on the side of the device, usually with a small cover or exposed slot.
  • Insertion the SD card: Make sure the gold fingers of the SD card is facing down and aligned with the slot of the card holder, gently insert the SD card into the card holder.
  • Fixed SD card: Once the SD card is inserted, the card will protrude slightly and be in a fixed position. The card should not protrude from the surface of the device.
  • Step 2:Taking out the SD card
  • Before removing the SD card, make sure the device has stopped using the card. On most devices, you can safely unmount the card from the operating system to avoid data loss or corruption.
  • Press the edge of the SD card and it will automatically exit so you can safely remove it.